- Series 1580 voltage limit increased from 35 to 50 V.
- Series 1580 current limit increased from 40 to 55 A.
- Users can fine-tune current calibration on Series 1520 1580 1585.
- Added missing Chinese translations.
- Series 1780 75 kg torque limit increased from 40 to 48 Nm.
- Support the new Series 1780 75 kg thrust, 100V, 500A.
- Simplified the database upload tab with a basic/advanced mode.
- Firmware 2.10:
- Firmware now supports new 75 kg Series 1780 thrust stand.
- We now support DShot, OneShot, Multishot and more (accessory req.)!
- Firmware 1.19:
- Firmware now supports new control board accessory.
- Application now available in Chinese!
- 现已支持中文版本
- Database upload supports the Series 1780 DUAL MOTOR.
- Tweaked database scripts, thanks Tronage (YouTube) for testing.
- Database upload supports the new Series 1585 and Series 1780.
- Lifted Series 1585 limits to 50V and 55A. Removed 1585 low pass filter.
- Fixed bug where raw load cell values were not saved correctly in CSV.
- Bug fixes in the experimental database feature.
- Added an experimental database upload function.
- PWM signals can now be turned off from script.
- Fixed issue where scientific notation was sometimes displayed.
- Added new script function "steps2" that allows cooling time and more.
- New feature: script UDP communication to control App from network.
- Fixed bug where power cutoff value could not be saved.
- Power (voltage x current) is now calculated on the fly instead of the IC.
- Fixed USB connnectivity issues on some Series 1780 revisions.
- Firmware 2.8:
- Fixed bugs with Series 1780 temperature glitches.
- Added email on contact form.
- Added support for the Series 1780 40kg version.
- Clarified the renaming of temperature probes.
- Fixed "vibration cutoff" bug on Series 1780.
- Added support for the larger version of the Series 1780 (40kg thrust).
- New feature: APP data migration and backup (see setup tab).
- Firmware 1.18:
- Support for the soon available Series 1585.
- Firmware 2.7:
- Added more debug details.
- Added support for Series 1780 pressure sensor.
- Added debug code to allow taring the current for 1580/1520.
- Added support for 6 temperature probes on Series 1780.
- Added support for the larger version of the Series 1780 (40kg thrust).
- Fixed bug where thrust plot was capped at 10kg.
- Firmware 2.6:
- Support for the above features.
- Fixed GUI occasionally freezing when changing safety cutoffs with the Series 1780.
- Firmware 2.5:
- Added more debug information to better troubleshoot circuit problems.
- Added button to reset plots scale.
- Fixed GUI display bugs.
- Improved firmware flashing error messages with suggested fixes.
- Added plots and CSV data for the Series 1780 B-side.
- Firmware 2.4:
- 1780 limit switch buzzer automatically turns off.
- Fixed 1780 connectivity problem.
- Support for limit switch and load cell overload cutoff.
- Fixed GUI display bugs.
- Software update button opens download page.
- Fixed small bugs with the Series 1780.
- Firmware 2.2:
- Supports load cell overload cutoff for Series 1780.
- Supports limit switch cutoff for Series 1780.
- Added support for the new Series 1780 dynamometer (mono version).
- Updated documentation for the optical probe.
- Changing tabs will not create a new log file when recording.
- Added script command to clear the automatic control console text.
- Links now open in external browser.
- Fixed Linux bugs with installer.
- Added instructions for increasing usb rates for linux.
- Clarification for firmware flashing instructions.
- Fixed bug related to updates.
- Fixed safety agreement bug.
- Fixed bug board not connecting.
- Added safety notice.
- Firmware 1.17:
- Fixed bug board not connecting.
- Fixed bug with autoupdate.
- Transitioned app to NWJS from Chrome App.
- Fixed plots glitches.
- Now supports higher and configurable update rates (100Hz+).
- Support for varying plot refresh rate.
- Firmware 1.16:
- Supports higher communication rates.
- Added more debug codes.
- Fixed bug related to last update (could not select automatic tab).
- Fixed bug on Mac preventing the selection of scripts in the dropdown menu.
- Automatic control tab can now be used while no board is connected.
- Fixed error in url when clicking the RCbenchmark logo.
- The atmospheric pressure for airspeed calculation is user adjustable.
- Added information to the pressure sensor help section.
- Fixed pressure unit bug when upgrading from an earlier version.
- Now support the RCbenchmark pressure sensor for pitot tubes.
- Now support negative currents to support generators instead of motors.
Do not inverse polarity!
- Fixed "steps go down" setting not working in the discrete steps script.
- Firmware 1.15:
- Supports negative currents.
- Fixed bug where some scripts were not loading on Linux based systems (thanks Rich).
- Fixed minification process exluding some files (cause script editor syntax highlight problems).
- Fixed CSV filename timestamp month being off by one month (thanks Damien).
- Fixed occasional load cell ADC glitch (very rare spike).
- Firmware 1.14:
- Improved ADC channel switch timing (fixes rare spike).
- Firmware 1.13:
- Supports PCB part swap due to manufacturer shortage.
- Hotfix: restored code editor syntax highlighting (thanks Damien).
- Added ability to add user comments to CSV files (see utilities tab).
- Torque and thrust sign can now be reversed from GUI.
- The log files will now display when a cutoff occurs.
- Fixed empty text in the cutoffs tabs for the temp. probes.
- Increased max system RPM to 500000eRPM.
- Fixed bug with efficiency calc being zero/negative in some cases.
- Fixed plot axis sometimes displaying 0.200000001
- New script: "90% settling time" for estimating system reaction time.
- Improved script error reporting and documentation (thanks Damien).
- Performance improvements (minified code).
- Fixed bug for "Get Number of Poles" and "Measure KV" scripts freezing.
- Now supports the Series 1520 product.
- Updated the discrete step script to allow looping.
- Added 2 new stock scripts: "Fixed Rate" and "Custom Sequence".
- Fixed plots scaling bug (efficiency will not scale over 100%).
- Fixed optical rpm probe reading 3000rpm when idle.
- Added script function for interative scripts (onKeyboardPress function).
- Firmware 1.12:
- Support for Series 1520
- Added option to change output PWM limits (servo and ESC).
- Fixed bug with servo 1.
- Improved calibration wizard error messages.
- Firmware 1.11:
- Fixed bug with servo 1.
- Improved plots color contrast.
- Left panel text does not fade to grey during automatic test.
- Tweaked help for RPM sensors.
- Fixed sensors glitch caused by temperature probes.
- Firmware 1.10:
- Remove onewire temp probe polling (now parallel with other tasks).
- Added support for custom load cells through hack codes.
- Now supports up to 3 temperature probes simultaneously.
- Added debug instructions for the optical probes.
- Firmware 1.9:
- Added support for temperature probes.
- Added pin states to debug mode
- Firmware 1.8:
- Added pin states to debug info
- Improved precision of the electrical RPM reading.
- Added optical RPM probe support.
- Added hack codes in debug mode.
- Changed landing page layout and added news.
- Slightly improved menu look.
- Firmware 1.7:
- Reworked rpm probe interrupts to give much smoother results
- Added support for optical rpm probes
- Fixed bug with connect issue when app freshly installed.
- Added burst current support to 50A
- Added new safety cutoff for power (in Watts)
- Added vibration level cutoff (improves safety)
- Firmware 1.6:
- Increased power chip shunt scale range
- Error when power chip saturates (improves safety)
- Now with vibration level output
- Removed autoconnect, due to low usage statistics
- Added firmware flash failure troubleshooting steps
- Added progress icon while connecting with timeout
- Added support for writing to raw text files from script
- Scripting layout improvement
- GUI is easier to resize
- Fixed bug in plots scrolling
- MAJOR UPDATE:
- Added automatic scripting (experimental).
- GUI style improvements.
- Changed plots color.
- Tare buttons merged into one.
- Tare button moved to main page.
- Firmware 1.5: circuit now reads power from IC.
- App now displays and records power.
- App now displays and records efficiency calculations.
- Bug fixes.
- GUI remembers tare values.
- Improved plots vertical scale.
- Added feedback box.
- Firmware synched torque cells update.
- Changed firmware to 1.4.
- Code cleanup.
- Firmware diagnostic improved.
- Changed firmware to 1.3.
- Spacebar shuts off motors.
- Bugfixes.
- GUI layout improvements.
- User selectable units.
- Bugfixes.
- Added utility tab.
- GUI layout improvements.
- Calibration wizard working.
- Bugfixes.
- GUI layout improvements.
- First public release.
- Supports tester tool beta v0.7.
- Major changes from original fork of the open-source CleanFlight projet v0.63.1.
- See credits to see a list of collaborators.